Genelec 8330AM-6 SAM™ Studiomonitori tummanharmaa

Genelec 8330A SAM™ Studio Monitor Dark Grey

Combining precision, adaptability and a small footprint, the 8330A offers colour-free performance and powerful room compensation features.

The professional’s choice

The choice of demanding professionals for whom power and flexibility go hand-in-hand, the 8330A offers a little more SPL and LF extension than its smaller 8320A sibling. Providing transparent and truthful reproduction, the 8330A’s wide uncoloured sweet spot means you are always in a position to make accurate, reliable mix decisions.

Truly optimised monitoring

As a Smart Active Monitor, the 8330A integrates closely with our GLM software via which it can be configured and calibrated for your listening environment, compensating for detrimental room influences to create a truly optimised monitoring solution from mono to immersive. So if you need to work in challenging acoustic spaces, the 8330A is your compact but clever monitoring companion.

Package contains:

1 x 8330A monitor
1 x mains cable 1,8 m
1 x RJ45 cable 5 m
1 x operating manual

Technical Specifications

System Specifications

Frequency Response

58 Hz - 20 kHz (± 1.5 dB)

Low cutoff -6dB
45 Hz

High cutoff -6dB
23 kHz

SPL

Peak SPL
≥110 dB

Maximum peak acoustic output per pair at 1 m distance with music material.

Short term max SPL
≥104 dB

Maximum short term sine wave acoustic output on axis in half space, averaged from 100 Hz to 3 kHz at 1 m.

Long term max SPL
≥96 dB

Maximum long term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver unit protection circuit) at 1 m.

Self-generated noise

Self-generated noise
≤5 dB

Self generated noise level in free field on axis (A-weighted).

Weight

Weight
5.5 kg (12.1 lb)

Dimensions

Height
285 mm (11 7/32 in)

Height with Iso-Pod
299 mm (11 25/32 in)

Width
189 mm (7 7/16 in)

Depth
178 mm (7 in)

Enclosure

Enclosure material
Die cast aluminium

Enclosure type
Reflex port

Drivers

Bass

Driver type
Cone

Diameter
130 mm (5 1/8 in)

Treble

Driver type
Metal dome

Diameter
19 mm (3/4 in)

Directivity

Vertical directivity

Horizontal directivity

Harmonic distortion

50…100 Hz ≤2 %
> 100 Hz ≤0.5 %

Group delay

The latency at high frequencies from the input to the acoustic output, measured in the analog input:

Extended Phase Linearity in GLM set to OFF
2.9 ms

In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.